16×16点阵LED电子显示屏的设计

论文编号:JD174             论文字数:17653,页数:41

摘要
本设计是一16×16点阵LED电子显示屏的设计。
整机以美国ATMEL 公司生产的40脚单片机AT89C51为核心，介绍了以它为控制系统的LED点阵电子显示屏的动态设计和开发过程。通过该芯片控制一个行驱动器 74HC154和两个列驱动器74HC595来驱动显示屏显示。该电子显示屏可以显示各种文字或单色图像，全屏能显示1个汉字，采用4块8×8点阵LED显示模块来组成16×16点阵显示模式。显示采用动态显示，使得图形或文字能够实现静止、移入移出等多种显示方式。文中详细介绍了LED点阵显示的硬件设计思路、硬件电路各个部分的功能及原理、相应软件的程序设计，以及使用说明等。
单片机控制系统程序采用单片机汇编语言进行编辑，通过编程控制各显示点对应LED阳极和阴极端的电平，就可以有效的控制各显示点的亮灭。所显示字符的点阵数据可以自行编写（即直接点阵画图），也可从标准字库中提取。
LED显示以其组构方式灵活、显示稳定、功耗低、寿命长、技术成熟、成本低廉等特点在车站、证券所、运动场馆、交通干道及各种室内/外显示场合的信息发布，公益宣传，环境参数实时，重大活动倒计时等等得到广泛的应用。
经实践证明，该系统显示误差小，性能稳定，结构合理，扩展能力强。

关键词：AT89C51单片机； LED； 点阵显示； 动态显示； 汇编语言。

Abstract
This design is a 16 ×16 lattice LED electron display monitor design.
The whole equipment is with the 40-pin AT89C51 MCU (Micro Controller Unit) produced by the American ATMEL company at the core, introduced take it as the control system LED lattice electron display monitor dynamic design and the development process. Controls good driver 74HC154 and two row driver 74HC595 through this chip actuates the display monitor demonstration. The electronic screen can show all kinds of written or monochrome images, one full screen display Chinese characters, four pieces of 8×8 dot-matrix LED display modules to form the 16×16 dot matrix display mode. Show dynamic show that makes static graphic or text can be achieved, shifted out of various formats. This paper describes the hardware design of the LED dot matrix display, and the principle function of the various parts of the circuit, the corresponding software program design and the use of some such.
SCM process control system used for editing MCU assembly language, Programming control points indicated by the corresponding LED anode and overcast extreme level. We can effectively control the defense showed bright spots. The lattice data shows characters can prepare themselves (that is, direct lattice Painting), which can also be extracted from the standard font.
LED display with fabric means flexibility, stability, low power consumption, long life, mature technology, low-cost features at the station, securities, sports venues, transportation corridors and various indoor / dissemination of information on foreign shows occasions, good publicity, real-time environmental parameters, etc. countdown major activities are widely used.
 As the practice proves, the system possesses advantages in low shows errors, stable, rational structure and strong extensible abilities.

Key words: AT89C51 Micro Controller Unit；  LED； Lattice display；  Dynamic display； Assembly language.

目录

摘要 I
Abstract II
第一章  前言 1
第二章  系统整体设计方案 2
2．1  需要实现的功能 2
2．2  LED显示特点 2
2．3  设计方案论证 3
2．3．1  显示模式方案 3
2．3．2  数据传输方案 4
第三章  系统硬件部分设计 5
3．1  电源设计 5
3．2  单片机系统及外围电路 6
3．2．1  单片机的选择 6
3．2．2  AT89C51芯片介绍 6
3．2．3  单片机系统外围电路 9
3．3  列驱动电路 10
3．4  行驱动电路 12
3．4．1  行驱动芯片74HC154 介绍 12
3．4．2  行驱动电路 13
3．5  LED显示屏电路 15
第四章  系统软件部分设计 17
4．1  系统主程序 17
4．2  显示驱动程序 18
第五章  调试及性能分析 20
5．1  软件调试 20
5．2  硬件调试 20
5．3  性能分析 21
结束语 22
致谢 23
附录一  系统综合电路原理图 24
附录二  系统程序清单 25
主要参考文献 32

相关论文