智能照明系统工程项目的实施

论文编号:ZD1026    论文字数:15473,页数:43

摘      要
 近年来，智能照明随智能建筑迅速兴起。KNX以EIB协议为基础，兼具了BatiBus和EHS中优点。KNX是家居和楼宇控制领域唯一的开放式国际标准ISO/IEC 14543-3，并于2007年正式成为中国国家标准GB/Z 20965-2007，也是智能照明领域的优秀控制系统之一。
 KNX/EIB拥有独立设计和测试工具ETS，提供多种通信介质 (TP, PL, RF 和 IP)和多种系统配置模式（A, E, S模式）。EIB智能系统的主要功能是灯光控制。例如简单开关、调光、场景、定时以及各种感应控制等。此外，EIB还可以进行窗帘、安全、空调等控制，并能与其他系统联动。
 本文就是针对EIB智能照明系统工程项目的实施展开，从工程项目的方案设计，设备选型到系统安装投运，参照一般住宅项目的基本流程逐一叙述。系统施工及调试均按照《控制网络HBES技术规范—住宅和楼宇控制系统》（GB/Z 20965-2007）实施，并以工程实例的形式进行了阐述。案例即是一个住宅项目，使用EIB智能系统，实现住宅家居的控制。

关键词：
智能照明；     KNX/EIB；       项目实施；

abstract
 In recent years, intelligent lighting keep with the rapid development of intelligent building. KNX bases on the eib protocol, both have advantages with BatiBus and EHS . KNX is the only open international standard in the home and building control areas (ISO/IEC 14543-3), and became the china national standard (GB/Z 20965-2007) in 2007. KNX/EIB is also an excellent system in the field of intelligent lighting control in the world.
 KNX/EIB has the independent design and test tools – ETS，and provide varieties of communications media (TP, PL, RF and IP) and system configuration mode (A, E, S mode). The main function of the EIB system is the intelligent lighting control. For example, a simple switch, dimming, scene control, time and varieties of sensor control. In addition, EIB can be used as curtains, safety,air conditioning controls, and linkage with other systems.
 This is about project implementation of the intelligent lighting system, from project design, equipment selection to system installation and operation, which as the general residential projects and described the basic processes one by one.the "Control network HBES technology specification—Home and building control system" (GB/Z 20965-2007) is used in system construction and commissioning and described in a project. The Case is a residential project, using EIB intelligent system to control the household equipment.
Key word:
Intelligent Lighting;   KNX/EIB;     Project implementation;

目     录
摘      要 II
1  前 言 1
2  系统简介 3
2.1 KNX/EIB概念 3
2.2 KNX/EIB 系统优势 3
2.3 系统功能 4
2.4 EIB系统结构 4
3  智能照明系统设计方法及流程 6
3.1 系统实施流程 6
3.2 系统方案规划 7
3.3系统控制设计 7
3.4 系统设备安装 8
3.5 测试和投运 9
3.6 软件编程 10
3.7项目文件 12
3.8系统的使用和维护 12
4  项目实施案例 14
4.1 项目案例简述 14
4.2 项目案例方案 14
4.3 项目设备配置 16
4.4 面板控制功能描述 17
4.5 项目系统安装 18
4.6 项目小结 18
5  ETS3运用 19
5.1 ETS3概述 19
5.2 ETS3的安装与配置 19
5.3 ETS3 IDE 19
5.4 编程实例 23
6  总  结 28
7  致  谢 29
附录A：案例控制回路表 31
附录B：案例项目图纸集 33

相关论文