论文编号:SW006 论文字数:10340,页数:22 摘要:本实验采用喷雾干燥法对乳清多肽进行微胶囊化包埋以达到消除苦味的目的。结果表明壁材的选择以及不同的芯壁材比例对苦味的掩盖效果有很大差异。其中亲水性壁材β-环糊精以及对疏水性壁材乙基纤维素的包埋效果相对较好,但疏水性壁材的效果远远没有亲水性的好。混合型壁材以亲疏结合的单甘酯和β-环糊精组合掩盖效果最理想且产品包埋率高。随着β-环糊精比例的增加,效果也越显著。此外,喷雾干燥的工艺参数也会影响微胶囊的产量和质量。本次实验中的喷雾干燥进风温度为200℃,出风温度为100℃ ~105℃,进料速度为50mL/min,进料雾化压力为0.18 MPa。包埋率最高可达73.45%,随着天数的增加产品的保留率逐渐变小,保留率的变化趋势平和没有大的波动。 Abstract: the present study was carried out to cover the bitter taste of whey poly-peptides by encapsulating using spray-drying technology. The covering efficiency was affected by wall material and the proportion between whey poly-peptides and wall material. Our results showed that the hydrophilicβ-cyclodextrin and the hydrophobic ethyl-cellulose had a comparatively good efficiency, although β-cyclodextrin was much better than ethyl-cellulose. The combination ofβ-cyclodextrin and glycerin monostearate was the best mixed wall material with high efficiency and productivity. Furthermore, spray drying craft condition was the main factor that affected the micro encapsulation efficiency. The spray drying craft condition in our experimental was: temperature of entering wind at 150℃, enter speed is 50ml/min, spray pressure as 0.18 MPa, the accepting rate of the products is about 73.5%. 目录
|
财务管理 市场营销 幼儿教育 PLC 单片机 教育 幼儿园 中小企业 教师 内部控制 工程造价 电子商务 PLC 变频调速 供水 系统 应用 控制 交流 变频 电梯 设计 火灾 自动 报警系统 单片机 烟雾 检测 篮球 比赛 计时器 自动售货机 控制系统 电热水器 温度 异步电动机 MATLAB 10kV 配电 线路 控制器 智能交通 机床 机械手 变电站 变压器 自动化 售货机 花样喷泉 立体车库 洗衣机 西门子PLC 组态控制 抢答器 数控车床 自行车 里程 车速 超声波 液位 传感器 密码锁 机构 数控激光 切割机设计 后托架 加工工艺 夹具设计 CA6140 传动轴 注塑 模具设计 液压 风险管理 银行 竞争力 中小企业 内部控制 状况 调查报告 融资 管理 中间业务 实习报告 金融 监管 制度 农村 养老保险 合作医疗 外贸 理财 规划 网上银行 发展现状 个人理财 人民币 升值
| |
上一篇:紫苏中木犀草素的检测及提取条件.. | 下一篇:茯苓多糖的高效提取工艺研究 |
推荐论文 | 本专业最新论文 |
Tags:乳清 多肽 胶囊 | 2011-03-31 12:47:39【返回顶部】 |