冰箱抽屉注塑模设计

材料成型及控制工程论文，论文编号:JX1459  论文字数:22629.页数:48  附任务书，开题报告，文献综述，外文翻译  CAD图

摘要

 近年来，塑料产品和塑料模具得到了飞速的发展，应用也越来越广泛。本文为冰箱抽屉设计了一副注射模。设计过程主要利用了Moldflow、UG和AutoCad工具软件，充分利用计算机辅助的优越性实现了设计方案。作者首先Moldflow进行了CAE分析，得到一系列的计算结果,接着分析了塑件的结构工艺性，选择了单分型面模具，采用滑块装置，并利用AutoCAD及燕秀工具箱完成了模具二维图纸的设计。然后，利用了UG的三维建模功能将模具二维图纸进行三维造型。最后利用AutoCAD修改该副模具的总体装配图和绘制一些重要零件的零件图。所设计的模具结构简单，机构运行可靠，所绘制的模具图纸对实际生产具有指导意义。
 
关键词:  注射模  UG  Moulflow  计算机辅助设计

Abstract
 In recent years, plastic products and plastic mold have developed rapidly, and their applications become more and more extensive. One injection mold for a refrigerator drawer was designed in this dissertation. The software tools of UG, AutoCAD and Moldflow are mainly used in the design process，and the advantages of computer-aided design programs were fully utilized to achieve the design scheme. Firstly, the author finished CAE analysis on parts by using Moldflow and obtained a series of calculated results, and analyzed the structure of the plastic part, and then chosed a single-mold surface and oblique-slip devices, and finished the drawings of the mold by AutoCAD and Yanxiu Tools at last.Then, parts modeling with the UG Moldwizard were finished. Finally,the author drew die deputy general assembly and some of the important parts with using the AutoCAD. As a whole the mould is simple in structure and good at working reliability. The design of this injection mold is of some significance for the fact production. In short, the mold design is simple and reliable, and the drawings of the mold are instructive for the actual production.
Keywords:  Injection mold;  UG;  Moldflow;  Computer-aided Design

目录
摘要 i
Abstract ii
目录 iii
第一章  绪论 1
1.1  引言 1
1.2  注塑模具发展动向 1
1.3  冰箱抽屉零件介绍 3
1.4  透明注塑件模具设计要点 4
1.5  注塑模具CAD/CAM/CAE发展趋势 5
1.6  小结 7
第二章  冰箱抽屉的CAE仿真分析 8
2.1  Moldflow 软件简介 8
2.2  冰箱抽屉的CAE仿真结果分析 10
2.2.1  导入冰箱抽屉模型 10
2.2.2  网格缺陷修改 11
2.2.3  最佳浇口位置确定 12
2.2.4  流动及翘曲的分析计算 12
2.2.5  流动及翘曲结果及相关处理 14
第三章  冰箱抽屉模具的热流道技术使用 17
3.1  热流道技术原理 17
3.2  塑模中的热流道技术 17
3.3  充分发挥热流道作用方法 21
3.4  热流道系统型号选择 22
第四章  冰箱抽屉注射模的其他零件设计 26
4.1  材料GPPS相关知识 26
4.2  塑件工艺性分析 27
4.3  分型面的选择 29
4.4  成型和结构零件的设计 30
4.4.1  型芯和型腔的生成 30
4.4.2  材料的选择 34
4.4.3  排气结构和分析 35
4.4.4  侧抽芯机构的设计 36
4.4.5  导向机构设计 36
4.4.6  紧定螺栓的选取 38
4.5  模架的选择与模具结构设计 38
4.6  冷却系统设计 38
4.7  UG完成的三维图 39
4.8  注塑机型号选择 40
第五章  总结 41
参考文献 42
致谢 43

相关论文