纵梁弯曲模设计

机械设计制造及其自动化论文，论文编号:JX993  论文字数:19245.页数:41

摘要
 
 本课题来源于纵梁的实际生产过程。完成纵梁批量生产，并且要达到客户的要求。但是传统的生产方式很难做到，因此纵梁弯曲模的设计在此当中很有必要。论文介绍了模具行业的一些发展趋势和模具制造方法，并且提到了一些模具制造的新技术，同时也介绍了纵梁弯曲模的设计过程。首先对纵梁弯曲的工艺进行分析，再对几种模具结构方案进行比较分析后确定纵梁弯曲模的方案，然后进行设计计算和模具结构设计。该模具具有结构简单，操作方便的特点，最后介绍了模具制造加工方法和模具安装调试方法，提出了在调试过程中如何发现纵梁弯曲的缺陷，并介绍了减少或消除缺陷的方法。该模具应用到实际生产中，提高了生产效率，降低了劳动强度，给企业带来了技术效益和经济效益。
 
 
 关键词：纵梁弯曲 工艺 模具 结构设计
 
  
Abstract
  
 This topic originates from the carline actual production process. Completes is the carline volume production, and the request achieves the customer’s request. But the traditional production method is very difficult to achieve, therefore it’s very necessary to design the carline’s Curving mold .The thesis briefed the mold profession some development tendencies and the mold manufacture method, and mentioned some molds make the new technology, simultaneously also introduced the carline’s curving mold design process. First, it carries on the analysis to the carline curving craft, and carries on the comparative analysis after several kinds of molds structures plan to determine the carline’s curving mold plan, then carries on the design calculation and the mold structural design. This mold has the structure to be simple, ease of operation characteristic .Finally introduced the mold manufacture processing method and the mold install the debugging method, proposed how in the debugging process discovered the carline curving flaw, and introduced reduced or the elimination flaw method. This mold applies in the actual production, enhanced the production efficiency, reduced the labor intensity, has brought the technical benefit and the economic efficiency to the enterprise.

Keywords: The carline’s curving  Craft  Mold  Structural design

目录
中文摘要...................................................................ⅰ
英文摘要...................................................................ⅱ
目录.......................................................................ⅲ
第一章     绪论.............................................................1
     1.1   研究动机和目的...................................................1
     1.2   研究背景.........................................................1
     1.3   研究方法和系统描述...............................................2
第二章     AutoCAD简介......................................................3
第三章     模具加工方法介绍.................................................5
  3.1  模具机械加工......................................................5
    3.1.1  普通机床加工..................................................5
    3.1.2  模具的仿形加工................................................5
    3.1.3  模具的精密加工................................................6
    3.1.4  模具的成形磨削................................................6
 3.2  模具数控加工......................................................6
 3.3  模具特种加工......................................................7
 3.3.1  模具电火花成形加工............................................7
 3.3.2  模具电火花线切割加工..........................................8
 3.3.3  模具电化学加工................................................8
 3.3.4  模具超声波加工与激光加工......................................9
 3.4  模具快速成形加工..................................................9
 3.5  并行工程.........................................................10
 3.6  逆向工程.........................................................10
第四章     模具结构工艺设计与计算..........................................11
     4.1  弯曲结构工艺与模具结构形式.......................................11
       4.1.1  弯曲工艺分析.................................................11
       4.1.2  工艺方案.....................................................11   
     4.2  工艺设计计算.....................................................11
       4.2.1  弯曲件毛坯尺寸计算...........................................11
       4.2.2  冲压力和弯曲力计算...........................................13
       4.2.3  冲裁模工作部分设计...........................................14
       4.2.4  弯曲模工作部分设计...........................................15
     4.3  模具结构设计.....................................................18
第五章    模具制造.........................................................20
     5.1  凹模制造.........................................................20
     5.2  导套制造.........................................................21
     5.3  导柱制造.........................................................23
第六章     模具的装配......................................................24
     6.1  模具装配的原则...................................................24
     6.2  总装配要点.......................................................24
     6.3  模具的装配流程...................................................24
     6.4  模具的调试.......................................................25
第七章     总结............................................................26
参考文献...................................................................27
致谢.......................................................................28a

相关论文