锁拉线扣手注塑模设计

论文编号:JX518   论文字数:22598,页数:45  有设计图，外文翻译

摘  要
 随着塑料工业的发展，注塑模具在现代工业中起着越来越重要的作用。本文主要介绍了塑料注塑模设计的方法及过程，分析了模具成型结构对塑件质量的影响。本文通过对塑件的结构分析，并用UG三维实体设计画出本塑件的外型结构，然后进行了模具的脱模机构、冷却系统、型芯、抽芯机构、模架和导向机构等的设计。侧抽芯机构的设计是设计的重点和难点。我们经分析采用了斜导柱侧抽的方法，既经济又有效，能够很好的解决这个问题。
 读者通过阅读本文，可以为其它的注塑模设计提供很好的参照。
关键词：模具  斜导柱  侧抽芯机构  型芯

Abstract
 With the development of the plastic industry, the mould plays a more and more important role in modern industry to mould plastics. This paper mainly introduces the method and the  process of the injecting mold designing, and analyses the influence of mould shaping structure to the quality of moulds.After the structure analysing of the mould,draw and design the appearance.structure with the UG three dimensional entity designing, then carry on drawing of patterns organization, cooling system of mould, core, mould shelf and design to lead organization,etc.. Core-pulling structure is the emphsis and difficulty of the article. We have used the slanting guide pillar side pulls out method , after the analysis which is both economy and effective, and it can solve this question perfectly .
 Through reading this article, the reader may be provided very good references when carrying on other injection mold.
Key words: Mold ；Inclined push rod ；Core-pulling structure ；Core  models

论文目录，请与本站客服联系查看。

相关论文