路宝车组合仪表罩单型腔注塑模设计

论文编号:JX511   论文字数:18300,页数:50  有设计图，外文翻译

摘  要
 模具是进行产品制造的一种全新工具，它有着简单、快捷的优点，特别是随着汽车工业的发展，模具业面临着一个全新的发展机遇。
 本文主要介绍了汽车组合仪表罩注塑模的设计过程。分析了塑件形状，确定了合理的设计方案，选择了合适的注塑机型号，设计了浇注系统的和冷却系统，着重对脱模机构进行了设计，特别是侧抽机构的设计。此外，还绘制了模具的动模图、定模图以及总装配图。
 本设计中，有详细的计算过程，丰富的插图，图文并茂，使读者更容易地明白设计的过程。
关键词：注塑模；动模；定模；浇注系统 
 
  
 
 
 Abstract
 The mold is one kind of brand-new tool to manufacture the production，with the merits of simple and quick. Specially, with the development of automobile industry, the mold industry is facing a new development opportunity.
 In this paper, it introduces the design process of the injection mold of the automobile instrument frame. First it analyzes the instrument frame and determines a reasonable design proposal, then chooses the appropriate injection molding machine model, and designs the feed system and the cooling system. It emphatically introduces the design of the ejecting mechanism, specially the design of the side pulling out mechanism. In addition, the movable mold moving half drawing, the stationary mold fixed half drawing and the general assembled drawings are drawn.
 There are detailed computations process and rich illustrations in this paper, which make the reader understand the design easily.
 Key words: Injection mold；Movable mold moving half；Stationary mold fixed half；Feed system  
 
 

论文目录，请与本站客服联系查看。

相关论文